9
Figure 31
Figure 30
Figure 29
post
connector
post
post
Installation—Digital Audio Models
7.
Align the connector on the bottom of the Duet card with the
connector on the logic board
(Figure 29)
, and then set the card
down on top of the three threaded posts. Make sure the connec-
tors are lined up, then, grasping the Duet card by its heat sink,
gently press it straight down until the connectors snap together.
Verify the connectors are completely coupled by gently pull-
ing up on the edges of the Encore/ST board; the board should
remain fi rmly in place.
8.
Making sure the Duet card’s captive screws are engaged prop-
erly in the threaded posts, tighten each of the three screws and
secure the card snugly to the logic board;
do not overtighten the
screws (Figure 30)
.
Close Computer
1.
Raise the side panel back into place
(Figure 31)
.
2.
Return the computer to your computing area if necessary, and
reconnect the power cord and peripheral cables to the computer.
Turn On Computer
Turn on your Power Mac; your accelerated machine should boot
normally.
Run Sonnet X Tune-Up
Running the Sonnet X Tune-Up install application is necessary
only when Mac OS X (any version) is installed on your system.
This application installs a fi le that enables Mac OS X to properly
identify processor speed, as well as L2 and L3 cache size and
speed. Remember to install this software when you upgrade to
Mac OS X. For complete information on Sonnet X Tune-Up,
please refer to the Read Me notes provided with the software.
1.
Boot your system in Mac OS X from a hard drive or parti-
tion, not a CD-ROM.
2.
Insert the Sonnet Installer CD into your CD-ROM drive,
double-click the ST/ZIF OS X Support folder, copy the
Sonnet X Tune-Up file to your desktop, and then eject the
Sonnet Installer CD.
3.
Run Sonnet X Tune-Up. After the installation is complete,
restart your system; your installation is complete.
side panel
raise release latch
screw
screw
screw
Duet card
Di
gi
ta
l A
u
d
io
WARNING:
When your computer is operating, the Duet’s
heat sinks will become VERY hot to the touch; take care to not
touch the heat sinks, or you may get burned.
Summary of Contents for ENCORE/ST G4 DUET
Page 2: ......
