2
GPU Card Installation Steps
Figure 1
Figure 2
1.
Remove the eGFX Breakaway Box (referred to as “the box” from this
point forward in this section) from its packaging, and then set it on a
flat, level surface.
2.
Remove and set aside the three thumbscrews securing the top cover to
the inner assembly
(Figure 1)
.
3.
Grasping the raised sections on the back edge, slide the top cover
toward you until it stops
(Figure 2)
.
4.
Lift the top cover straight up, pull the sides apart slightly, and then
remove and set aside the cover
(Figure 2)
.
5.
Remove and set aside the two screws securing the PCIe card bracket
locking plate to the inner assembly
(Figure 3)
.
6.
Remove and set aside the thumbscrew securing the PCIe card bracket
locking plate, and then remove the port access cover
(Figure 3)
.
Support Note:
To avoid damaging components due to static
electricity discharge, wear an antistatic wrist strap while working
inside the eGFX Breakaway Box.
Figure 3
