Safety
2
2.3.2 Danger to life due to explosive and flammable materials
►
Do not use the storage system in potentially explosive environments.
2.3.3 Danger to life due to product modifications or changes to
the product environment
►
Never block or bypass the protective devices.
►
Never modify the protective devices.
►
Do not make changes to the storage system.
►
Do not make changes to the electrical and data supply lines.
2.3.4 Danger of injury and risk of material damage due to improper
repairs
►
Never attempt to repair the storage system yourself.
►
Have faults and damage fixed by the sonnen service team.
2.3.5 Conduct in case of a fire / Important information for fire
services
Fire may occur with electrical equipment despite its careful design. Likewise, a fire
in the vicinity of the equipment can cause the storage system to catch fire,
releasing the contents of the battery modules.
►
Observe the warnings about the risk of injury/burns due to the escape of
electrolyte (see section 2.5 – pg. 8).
In the event of a fire in the vicinity of the product or in the storage system itself,
proceed as follows:
►
Only firefighters with appropriate protective equipment (safety gloves, safety
clothing, face guard, breathing protection) are permitted to enter the room where
the burning storage system is located.
There is a danger of electrocution when extinguishing fire while the storage system
is switched on. Therefore, before starting to extinguish the fire:
►
Switch off the storage system.
►
Switch off the mains fuses in the building.
If the storage system and/or mains fuses cannot be safely switched off:
►
Observe the minimum distances specified in DIN VDE 0132 for the
extinguishing agent used.
The storage system works with an output voltage of 230 V (AC) and is therefore
considered a low-voltage system.
KD-225 | Art. no. 52186 | EN | Version 1.00
Page 7
of 26
All manuals and user guides at all-guides.com