page 2 of 3
2
DISPENSER COMPATIBILITY
The SenseClean
TM
Hand Hygiene Module can be used with the following GOJO dispensers:
•
1930V3-04
–
PURELL LTX-12 SMARTLINK Ready Wht/Wht
•
1930V3-04-CHR
–
PURELL LTX-12 SMARTLINK Ready Blk/Chr
•
1931V3-04
–
PROVON LTX-12 SMARTLINK Ready Wht/Gry
•
1931V3-04-CHR
–
PROVON LTX-12 SMARTLINK Ready Blk/Chr
3
MOUNTING
Mounting of the SenseCleanTM Hand Hygiene Module is to be performed by a representative of the
dispenser manufacturer. The module shall be plugged into one of the compatible dispensers as described
in this user manual. The plugging is a simple procedure that does not demand any training. The dispenser
itself can remain mounted, e.g. on a wall, during the procedure.
The following step-by-step instruction should be followed.
3.1
Open the GOJO dispenser
Press the door latches inward to release the door and pull the door forward.
3.2
Orient the module and plug the cable
The module is to be mounted with the label facing the person doing the assembly. This will make the
symbol with the hand and the droplet visible through the dispenser.
Plug the module into the mechanical guiding structures on the inside of the dispenser and plug the cable
to the input of the dispenser electronics.
3.3
Close and inspect
Close the lid and check that the module is visible through the dispenser. Place a hand below the dispenser
to check that the LED blinks.
Figure: Illustration of how the dispenser with a module will appear when correctly mounted.
