SONIQ CWR150NS-AU, Instruction Manual, Page: 67 / 90

- 66 -
The following table describes the parameters of this page:
Field Description
ACS
URL The URL of the auto-configuration server to
connect to.
User Name The user name for logging in to the ACS.
Password The password for logging in to the ACS.
Periodic Inform Enable Select Enable to periodically connect to the
ACS to check whether the configuration
updates.
Periodic Inform
Interval Specify the amount of time between
connections to ACS.
Connection Request
User Name The connection usrname provided by TR-069
service.
Password The connection password provided by TR-069
service.
Debug
Show Message Select Enable to display ACS SOAP messages
on the serial console.
CPE sends GetRPC Select Enbale , the router contacts the ACS to
obtain configuration updates.
Skip MReboot Specify whether to send an MReboot event
code in the inform message.
Delay Specify whether to start the TR-069 program
after a short delay.
Auto-Execution Specify whether to automatically start the
TR-069 after the router is powered on.
3.5.6 ACL
Choose Service > ACL , the page shown in the following figure appears. In this
page, you can permit the data packets from LAN or WAN to access the router. You