SONIQ CWR150NS-AU, Instruction Manual, Page: 21 / 90

- 20 -
After setting, click Next , the page as shown in the following figure appears.
The following table describes the parameters in this page:
Field Description
Obtain an IP address
automatically Select it, the DHCP assigns the IP address for
PPPoE connection.
Use the following IP
address
Select it, you need to enter the IP address for
PPPoE connection, which is provided by your
ISP.
Enable NAT
Select the checkbox to enable network address
translation (NAT). If you do not select it and you
want to access the Internet normally, you must
add a route on the uplink equipment. Otherwise,
the access to the Internet fails. Normally, it is
required to enable NAT.