SONIQ CWR150NS-AU, Instruction Manual, Page: 25 / 90

- 24 -
Field Description
you must add a route on the uplink
equipment. Otherwise, the access to the
Internet fails. Normally, it is required to
enable NAT.
Note:
If the WAN connection type is set to 1483 Routed , the parameters of the WAN
connection type are the same as that of 1483 MER . For the parameters in these
pages, refer to the parameter description of 1483 MER .
1483 Bridged
In the Connection Type page, set the WAN connection type to 1483 Bridged , the
encapsulation mode to LLC/SNAP .
After setting, click Next , the page as shown in the following figure appears.