![Sonim XP3400 ARMOR User Manual Download Page 48](http://html1.mh-extra.com/html/sonim/xp3400-armor/xp3400-armor_user-manual_1321253048.webp)
48
Tools
Tools
This section contains miscellaneous features supported
by the handset.
Alarm
You can set alarm for a particular time. Select
Menu >
Tools > Alarm
.
1. To set a simple alarm, select
Menu > Tools > Alarm
>
Set.
Enter the time and select
Repeat > off
.
Select
Save
.
2. To set a recurrent alarm, select
Menu > Tools >
Alarm > Set.
Enter the time and select
Repeat >
Set
. Select the
Repeat Days
and select
Save
.
3. To set the alarm tone, select
Menu > Tools > Alarm
> Alarm tone
. Select the alarm tone.
4. To enable snooze, select
Menu > Tools > Alarm >
Snooze time-out
. Enter the time in minutes.
The alarm will work even if the phone is in
Silent mode.
The alarm will work even if the phone is
switched off.
A-GPS
The Global Positioning System (GPS) is a Global
Navigation Satellite System. It uses satellites that transmit
precise microwave signals, which enable GPS receivers
to determine their current location and time.
When an user accesses an application that requires GPS,
then GPS is turned on automatically. After the application
is closed, GPS is turned off automatically.
The GPS relies on satellite signal to calculate position.
Under conditions of poor satellite reception (that is,
under a tree, bad weather, and so on) standalone GPS
receivers take long time (sometimes a few minutes) to
provide location information to the users. The special
feature Assisted GPS (A-GPS) available in Sonim XP3300
FORCE speeds up the phone’s process of calculating
the position irrespective of the signal conditions. When
A-GPS is enabled, the phone automatically downloads
the latest satellite related information (Ephemeris data)
through GPRS. This information is used along with the
satellite signals to calculate the position (Downloading of
Ephemeris data may result in network charges).
To configure the A-GPS on your phone, do the following:
1. Procure the internet access point and A-GPS server
information from the service provider or operator.
2. Select
Menu > Tools > GPS Service
.
3. Select
GPS Switch > On
.
4. Select
AGPS Service
.
Notes
Select
Menu > Tools > Notes
to store the required
information.
To-Do list
Select
Menu > Tools > To-Do List
to store the required
information.
Click
Options
to perform the following tasks: