30
Redbox RB-VHEDD8 & RB-VHDDD8 User Handbook
INTRODUCTION
INTRODUC
TION
1
Static Settings
These are the static network settings used when DHCP is not enabled.
Status
Displays the current network address information currently in use by the unit, along with
the physical address of the network interface.
Factory Reset
This menu selection is used to reset all control parameters to their default settings.
Excluding the network configuration settings. Once completed, this operation cannot be
undone.
Information
This selection shows product and software version information. From the system sub-
menu
select
INFORMATION
.
Product:
This is set to RB-VHDDD8/RB-VHEDD8. This is used to identify the unit when
using a PC and the Redbox control software.
Serial No:
The Serial Number is factory set. Always quote this number in any
correspondence with Sonifex technical support.
Firmware/FPGA/Display/AIM:
These are the versions of firmware contained in the unit.
This software can be upgraded. For the latest software updates, check the Sonifex website
at www.sonifex.co.uk
Dolby :
This is the current version of firmware in the Dolby Encoder or Decoder card.
Summary of Contents for Redbox RB-VHDDD8
