Redbox RB-VHEDD8 & RB-VHDDD8 User Handbook
35
SCI
2
SCI
Network
This displays the current settings and status of the network connection on the unit.
Enable DHCP: This enables the unit to receive it’s IP address, subnet mask and gateway
settings from a DHCP server. If one is not available then this should be disabled through
the serial port and a valid static address be entered. This option cannot be set via SCi and
must be set via the front panel of the unit.
Selecting the CURRENT page displays the network address in use by the unit.
IP Address: Displays the current IP address of the unit (this is also displayed on the bottom
of the screen). If DHCP is enabled then this will normally be the IP address supplied by the
DHCP server.
Subnet Mask: Displays the current subnet mask for the unit.
Default gateway: Displays the current default gateway for the unit.
MAC Address: The unit’s MAC address. This cannot be changed.
Selecting the STATIC page displays the static network address stored in the unit. This
address is used when the DHCP is disabled.
Note:
The units are discovered using broadcast packets. If your PC has two network cards,
then there is a limitation in windows that requires the two addresses to be on different
subnet addresses.
Summary of Contents for Redbox RB-VHDDD8
