Sonifex Redbox RB-DMX4 User Handbook Manual Download Page 5

Redbox RB-DMX4 User Handbook

i

Warranty 

Warranty and Liability

Important: the purchaser is advised to read this clause

The Company agrees to repair or (at its discretion) replace Goods which are found to 

a. 

be defective (fair wear and tear excepted) and which are returned to the Company 
within 12 months of the date of despatch provided that each of the following  
are satisfied:

  notification of any defect is given to the Company immediately upon its becoming 

i. 

apparent to the Purchaser;

  the Goods have only been operated under normal operating conditions and have 

ii. 

only been subject to normal use (and in particular the Goods must have been 
correctly connected and must not have been subject to high voltage or to ionising 
radiation and must not have been used contrary to the Company’s technical 
recommendations);
the Goods are returned to the Company’s premises at the Purchaser’s expense;

iii. 

any Goods or parts of Goods replaced shall become the property of  

iv. 

the Company;

  no work whatsoever (other than normal and proper maintenance) has been 

v. 

carried out to the Goods or any part of the Goods without the Company’s prior 
written consent;
the defect has not arisen from a design made, furnished or specified by  

vi. 

the Purchaser;
the Goods have been assembled or incorporated into other goods only in 

vii. 

accordance with any instructions issued by the Company;
the defect has not arisen from a design modified by the Purchaser;

viii. 

the defect has not arisen from an item manufactured by a person other than  

ix. 

the Company.  

In respect of any item manufactured by a person other than the Company, the Purchaser 
shall only be entitled to the benefit of any warranty or guarantee provided by such 
manufacturer to the Company.

In respect of computer software supplied by the Company the Company does not 

b. 

warrant that the use of the software will be uninterrupted or error free.

WARRANTY

W

ARR

ANT

Y

Summary of Contents for Redbox RB-DMX4





































Reviews: