manualshive.com logo in svg

Sonifex Redbox RB-DEDD8, User Handbook Manual

Share
Download
Sonifex Redbox RB-DEDD8 User Handbook Manual Download Page 37

Redbox RB-DEED8 & RB-DEDD8 User Handbook

25

SCI

SCI

2

RB-DEDD8 System Screen

Fig 2-3: RB-DEDD8 System Screen.

Disconnect/Connect

Use this button to connect or disconnect SCi to the unit.

Update Firmware

The firmware will occasionally be updated to add new features or correct any possible 
issues that may arise. Check for updates at: http://www.sonifex.co.uk/technical/software

To update the firmware click on the button labeled “Update Firmware” and then select the 
downloaded firmware file. Firmware files will have an “.dwn” extension.

A progress bar will appear in SCi, indicating the progress of the update. Once complete, the 
unit will need to be powered off and on for the update to take effect.

Status

Shows the status of the unit, including the decoder cand the video reference.  

The decoder status displays the bitstream currently being decoded by the unit.

Summary of Contents for Redbox RB-DEDD8





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands