manualshive.com logo in svg

Sonifex Redbox RB-DEDD8, User Handbook Manual, Page: 26 / 52

Share
Download
Sonifex Redbox RB-DEDD8 User Handbook Manual Download Page 26

14

Redbox RB-DEED8 & RB-DEDD8 User Handbook

INTRODUCTION

INTRODUC

TION

1

options are AUTO, STREAM 1, STREAM 2, STREAM 3, STREAM 4, STREAM 5, STREAM 6 and 
STREAM 7.  The default selection is AUTO.

Listening Mode

This option selects the main channel output listening mode for Dolby  Digital bitstreams.  
See Appendix for the definition of each selection.  The available options are FULL, EX, 3 
STEREO, PHANTOM, STEREO and MONO.  The default selection is FULL.

Dynamic Range Control

This option selects the main output Dynamic Range Control mode.  The available options 
are LINE MODE, RF MODE, CUSTOM MODE and BYPASS MODE.  The default selection is LINE 
MODE.

Pro-Logic Decode

This option controls the Dolby  Pro-Logic decode processing for Dolby  Digital and PCM 
bitstreams.  The available options are DISABLE and ENABLE.  The default selection is 
DISABLE.  This replicates the menu control from the PCM sub-menu.

Dolby E

This selection shows the Dolby E sub-menu.  This contains the decoder controls 
when a Dolby E bit-stream is being decoded.  The sub-menu item is DIALOGUE 
NORMALIZATION.

Dialogue Normalization

This option controls the application of the dialogue normalization value from the the 
metadata to the main outputs.  The available options are DISABLE and ENABLE.

PCM

This selection shows the PCM sub-menu.  This contains decoder controls when linear PCM 
is being sent to the decoder. The sub-menu items are LATENCY, METADATA, PRO-LOGIC 
DECODE and PCM METADATA.

Latency

This option specifies the amount of latency through the decoder when PCM bitstreams 
are being received.  The available options are SINGLE FRAME and MINIMUM.  The default 
selection is SINGLE FRAME.

Metadata

This option controls the metadata output when PCM bitstreams are being sent to the 
decoder. The metadata parameters are controlled from the PCM metadata menu selection 
in the Decoder Control sub-menu.  The available options are DISABLE and ENABLE.  The 
default selection is DISABLE.

Summary of Contents for Redbox RB-DEDD8





















































Reviews:

No comments