SonicWALL SuperMassive 9200 Getting Started Manual Download Page 10

Page: 10 / 73

SonicWall

SuperMassive

9200/9400/9600

Getting

Started

Guide

5 Two

power

cords*

6 One

Safety,

Environmental,

and

Regulatory

Information

document

7 One

SonicWall

SuperMassive

9200/9400/9600

Getting

Started

Guide

*The

included

power

cords

are

approved

for

use

only

specific

countries

regions.

Before

using

power

cord,

verify

that

rated

and

approved

for

use

your

location.

The

power

cords

are

for

mains

installation

only.

Field

conversion

power

cable

different,

see

Installation

Requirements

page

for

information.

SuperMassive

Package

Contents

Missing

Items?

any

items

are

missing

from

your

package,

contact

SonicWall

Support

at:

https://support.sonicwall.com/contact

‐

support

SonicWall SuperMassive 9600

CONSOLE

SDHC

MGMT

X19

X17

X16

X14

X12

X10

1GE

10GE

BYPASS

STATUS

X11

X13

X15

X18

ALARM

TEST

PWR 1

PWR 2

SonicWall™ SuperMassive™ 9200/9400/9600

ng Started Guide

Regulatory Model Numbers:

1RK28-0A6 – SuperMassive 9200
1RK28-0A7 – SuperMassive 9400
1RK28-0A8 – SuperMassive 9600

SonicWall™ Products

Safety, Environmental, and Regulatory
Informa

ƟŽŶ

January 2017

The following informa

on comprises the safety, environmental, and regulatory message

applicable to SonicWall products. These messages ensure proper handling and disposal of
the equipment.

The various messages are grouped by language. In general, the languages of the European
Union appear

rst and are grouped alphabe

cally. Non European Union languages are

grouped together towards the back, a

er the double line.

sonicwall.com | support.sonicwall.com

232 001007 50 Rev A

SonicWall is a trademark or registered trademark of SonicWall Inc. and/or its

Ăĸ

liates in the U.S.A.

and/or other countries. All other trademarks are property of their respec

ve owners.

The informa

on in this document is provided in connec

on with SonicWall Inc. and/or its a

liates'

products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is
granted by this document. SonicWall Inc. and/or its a

liates do not make any commitment to update

the informa

on contained in this document. For more informa

on, visit

ps://www.sonicwall.com/

legal/.

Summary of Contents for SuperMassive 9200










































































Search results

Summary of Contents for SuperMassive 9200

Reviews:

Related manuals for SuperMassive 9200

Brands by name

Popular brands

SonicWALL SuperMassive 9200, Getting Started Manual

Search results

Summary of Contents for SuperMassive 9200

Reviews:

Related manuals for SuperMassive 9200

Brands by name

Popular brands