SonicWALL PRO 1260 Getting Started Guide Page 3
Note:
If you are not using one of the network configurations above, refer to the
SonicOS Enhanced Administrator’s Guide available on the SonicWALL Resource CD
and on the Web at:
<http://www.sonicwall.com/support/documentation.html>
.
Other Information
SonicWALL Management Interface
To access the SonicWALL PRO 1260 Web-based management interface. These are
the default settings, which you can change:
User Name:
admin
Password:
(default:
password
)
Applying Power to the SonicWALL PRO 1260
1. Plug the power cord into the SonicWALL PRO 1260 and into an appropriate power
outlet.
2. Turn on the power switch on the rear of the appliance next to the power cord.
The Power LED
on the front panel lights up green when you plug in the
SonicWALL PRO 1260. The Alarm
LED may light up and the Test
LED will
light up and may blink while the appliance performs a series of diagnostic tests.
When the Power LED is lit and the Test LED is no longer lit, the
SonicWALL PRO 1260 is ready for configuration.
If the Test or Alarm LEDs remain lit after the SonicWALL PRO 1260 has booted,
restart the SonicWALL PRO 1260
Dial in to a server
PPTP
Server Address:
User Name:
Password:
If you connect
via
You probably
use
Please record
2
