SonicWALL 10-Port Series, Quick Start Manual

Page: 9 / 36

SonicWall Switch Quick Start Guide 9
1
Serial Console Port (RJ45)
8
Reset button: Press to reset the switch to current
settings. Press for 10 seconds to enter Recovery mode.
Note: Returns Switch to default configuration.
2
Power On LED
9
LAN Mode (per copper port) : Off = No link;
Amber = active100 Mbps link;
Green = active 1 Gbps link;
PoE Mode: Off = No PoE activity;
Green = active PoE current;
Amber = PoE fault or overcurrent
3
Fault LED: Off = normal; Lit = Fault
10
Link/Activity LED (per copper port) : Off = No link;
Solid Light = link on;
Blinking = packet transfer in process
4
PoE Max LED: Off = Additional PoE device may be
added; Lit = PoE power limit exceeded
11
RJ45 LAN Ports: 10/100/1000 Mbps RJ45 LAN ports
5
LAN Mode LED: Off = LAN mode off;
Lit = LAN mode on
12
SFP Link/Act (per SFP port) : Off = No link; Green =
active link; Blinking = packet transfer in process
6
PoE Mode LED: Off = PoE mode off;
Lit = PoE mode on
13
SFP Speed (per SFP port) : Off = No traffic; Green = 1
Gbps
7
LAN/PoE Mode Selector: Press to change between
LAN and PoE LED display modes. Refer to feature 9.
14
SFP Ports: 1 Gbps ports
15
AC Power Port