SonicWALL 10-Port Series, Quick Start Manual

Page: 11 / 36

SonicWall Switch Quick Start Guide 11
1
Serial Console Port (RJ45)
8
Reset button : Press to reset the switch to current
settings. Press for 10 seconds to go to Recovery Mode.
Note: Returns Switch to default configuration.
2
Power On LED
9
RJ45 LAN Ports: 10/100/1000 Mbps RJ45 LAN ports
3
Fault LED: Off = normal; Lit = Fault
10
LAN Mode (per copper port): Off = No link;
Amber = active 100 Mbps link;
Green = active1 Gbps link.
PoE Mode : Off = No PoE;
Amber = excess PoE current;
Green = active PoE current
4
PoE Max LED: Off = Additional PoE device may be
added;
Lit = PoE power limit exceeded
11
Link/Act LED (per copper port): Off: No link;
Lit = link on;
Blinking = packet transfer in process
5
LAN Mode LED: Off = LAN mode off;
Lit = LAN mode on
12
SFP+ Ports (per SFP port}: Small Form Pluggable ports:
1 or 10 Gbps ports
6
PoE Mode LED: Off = PoE mode off;
Lit = PoE mode on
13
SFP+ Speed LED (per SFP+ port) : Off = no packet
transfer; Green = 1 or 10 Gbps
7
LAN/PoE Mode Selector: Press to change between
LAN and PoE LED display modes. Refer to feature 10.
14
SFP+ Link/Act LED (per SFP+ port) : Off = No link;
Green = active link;
Blinking = packet transfer in process
15
AC Power Port