After Service
Symptom
Things to check
before after service
Actions
Power is not turned on.
Things to check
Plug power cable correctly
into the power
Body shakes with noise a lot.
Make sure power cable is
correctly connected to power.
Move the product on solid
and level floor
Product stops abruptly
during operation.
Make sure there are not many
other plugs in one power outlet.
Connect this product to
one power alone
Control panel operates well
but the plate does not vibrate.
Make sure intensity is
set to zero(0).
Adjust intensity level by touching
up or down buttons.
Things to check before after service
Product generates
buzzing noise.
Make sure ambient
temperature is
too high or the product is used
too long.
In case ambient temperature is
too high or the product is used
too long, the fan starts to
operate to prevent overheating.
You can continue to use with no
problem.
If the product may not operate properly after checking, please call your dealer for after service.
48
The control panel operates
normally. But "START" button
does not work.
Check machine when power
on unloaded plate or not.
Make unloaded plate and put power
cable on then wait 3 seconds until
"dd-ring" sound comes out. After listen
dd-ring sound, push " START" button.
Integrated
Sonic Wave System