13
5
A
Ÿ
For assembly of the jumping mat (A) and springs (B), please strictly refer to the following methods:
Ÿ
A. First, select a spring hole on the top frame as a starting point and mark it, and then, as shown in the picture, find the 18th, 36th and 54th
spring holes by counting.
Ÿ
B. In the same way as detailed above, find the triangular ring in corresponding number on the jumping mat (A), and mark it.
Ÿ
C. Hang one end of the spring onto the triangular ring of the jumping mat (A) and the other end onto the top frame with a spring hook (T).
Ÿ
Note: The 2 ends of the springs (B) are not the same that the degree of bending of hanging at one end of the triangular ring is larger than
hanging at the other end, as shown in the picture.
Ÿ
D. Follow the illustrations to assemble the symmetrical two springs (B) in turn until all the springs (B) are placed on frames securely.
B