Sonel MRU-30, User Manual, Page: 35 / 56

MRU-30
– USER MANUAL
33
5 Memory of measurement results
Measurements can be stored in memory. The MRU-30 has a memory divided into 10 banks of 99 cells
each. Each memory cell can store all measurement results of individual tests. Measurement results are
stored in a memory cell with a selected number and selected memory bank. The user of the meter can
optionally assign memory cell numbers to individual measurement points and the memory bank num-
bers to individual facilities.
The user may also perform measurements in any chosen sequence and repeat them without losing
other data. Results stored in the memory can be recalled or downloaded to a computer.
Results of single measurement can be stored in one memory cell. After entering the measurement
result, the number of the cell, its ID number, is automatically increased.
It is a good practice before performing a new series of measurements to delete the memory contents
of cells that are going to hold new measurement data.
5.1 Storing the measurement results in the memory
After completing a measurement press
ENTER .
The meter will enter into the mode for storing test
results.
If the destination cell
is empty it is indicated
by the blank spaces.
If the cell is occupied
by the same type of
results the screen will
show measurement
data.