THERMAL IMAGER SONEL KT-80 and KT-145
44
4.10.3 Battery power supply
After turning on battery powered camera, battery charge level indicator is displayed in the
upper left corner of the screen.
During camera operation the battery charge level is being shown in real time:
Max.
min.
4.10.4 Charging batteries
NOTE!
When using for the first time the battery should be charged with the use of USB
charger, that is supplied with each camera, for at least 4 hours. The camera
should be switched off when charging.
When the camera is turned off, and the battery is inside, connecting the AC adapter and
starting the charging procedure is signalled by the LED charging indicator next to micro
USB port. When fully charged, LED indicator is turning off.
Rapid LED indicator's flashing during charging process indicates malfunction occurance
(i.e. broken batteries). In this situation, the charging procedure has to be stopped, and the
reason for malfunction must be identified.
In case the charging malfuncion was caused by the overheated bateries, the charging has
to be stopped until the batteries cool down.
NOTE!
Use only the AC adapter supplied with the camera.
NOTE!
Do not remove the battery from the camera while it’s being charged.
NOTE!
Use only the batteries supplied by the manufacturer with the camera.
NOTE!
Battery charging should be performed in 0...40°C temperature range.
Summary of Contents for KT-145
Page 1: ...USER MANUAL THERMAL IMAGERS KT 80 and KT 145...
Page 2: ......
Page 58: ...THERMAL IMAGER SONEL KT 80 and KT 145 56 NOTES...
