8
SONAMP
®
875D SE 8-CHANNEL AMPLIFIER
Powering the Amplifier
Power Cord
(see
Figure 4
)
The Sonamp 875D SE features a removable IEC power cord. Plug the female end of the power
cord into the Power Cord Connector on the amplifier’s rear panel and plug the male end into a
20-amp grounded wall socket. DO NOT plug the power cord into an AC outlet on your
preamplifier/receiver.
C
CAAU
UTTIIO
ON
N:: TToo pprreevveenntt eelleeccttrriicc sshhoocckk,, ddoo nnoott ddeeffeeaatt tthhee ggrroouunndd pprroonngg ooff tthhee
ppoow
weerr ccoorrdd pplluugg..
NOTE: If you need to use an extension cord, use only a heavy -duty (14-gauge or
larger) extension cord to avoid star ving the amplif ier of all the cur rent
necessar y for full-power operation.
Replacing the Fuse
(see
Figure 4
)
C
CAAU
UTTIIO
ON
N:: FFoorr ccoonnttiinnuueedd pprrootteeccttiioonn aaggaaiinnsstt ffiirree,, rreeppllaaccee tthhee ffuussee w
wiitthh oonnllyy tthhee ssaam
mee ttyyppee aanndd rraattiinngg..
1. Remove the power cord from the wall outlet and from the amplifier’s Power Cord Connector.
2. Insert a flat-blade screwdriver or similar tool into the empty Power Cord Connector socket and gently pry the fuse holder out
of its socket.
3. Install the proper fuse in the fuse holder and replace the fuse holder back into its socket next to the power cord connection.
When the amplifier is operating, the fuse will blow to protect it from possible internal parts failure. NEVER replace the fuse
with any size other than that indicated on the rear panel to avoid more serious damage and the risk of fire. Substitution
of a larger fuse may create serious damage to internal parts and will void your Sonance warranty.
A.C. O
N
LED
(
see Figure 5
)
The AC O
N
LED indicates that the amplifier’s power cord is plugged-into a live AC outlet and
its P
OWER
button is ON. If the amplifier’s AC fuse ever opens, this LED will go out. To use the
A
UTO
-O
N
feature (see page 12), this LED must remain ON at all times.
A
CTIVE
LED
(see
Figure 5
)
The amplifier’s A
CTIVE
LED will illuminate whenever any zone is active. Each zone’s S
TATUS
I
NDICATORS
(see
Figure 3) also contain an A
CTIVE
LED that will illuminate whenever that particular
zone is ON.
A.C. ON
ACTIVE
Figure 5:
AC O
N
and
A
CTIVE
LEDs
CAUTION: REPLACE WITH THE
SAME TYPE AND RATING FUSE
120V–60Hz 1200W
–FUSE T10AL 250V
Figure 4:
Power Connector
and Fuse Holder
Summary of Contents for Sonamp 875D SE
Page 1: ...INSTRUCTION MANUAL SONAMP 875D SE 8 CHANNEL AMPLIFIER...
Page 2: ......
Page 26: ...26 SONAMP 875D SE 8 CHANNEL AMPLIFIER System Notes...
Page 27: ......
