17
SONAMP
®
875D SE 8-CHANNEL AMPLIFIER
Specifications
Number of Channels:
8 (four stereo pairs)
Output Power (Stereo):
75 watts RMS per channel (X8), 0.25% THD, 20Hz – 20kHz, @ 8 ohms;
140 Watts per channel (X8), 0.1% THD, 1kHz, @ 4 ohms
Output Power (Bridged):
300 Watts per channel (X4) @ 8 ohms
Frequency Response:
20Hz – 20kHz, ±1dB
Total Harmonic Distortion:
0.05% (1kHz, 8 ohms); 0.10% (1kHz, 4 ohms)
Signal to Noise Ratio:
-96dB (w/22kHz filter)
Input Sensitivity:
1.5V for 75W RMS Output
1.3V w/BBE ON (+6dB)
1.0V w/BBE ON (+9dB)
Input Impedance:
10k ohms
Maximum Source Input Voltage:
4.0 VAC RMS
3.0V AC RMS w/BBE ON
Loop Output Impedance (Buffered):
100 ohms
Serial Protocol (RS-232 Connection):
9600, N, 8, 1, single CR
Power Consumption:
1,200 Watts
BTU/HR:
850
AC Fuse:
10A (T10AL ~ 250V)
Dimensions (WxHxD):
16½” x 3
7
/
8
” x 17¼” (419mm x 98mm x 438mm)
Dimensions (w/Rack Ears, WxHxD):
19” x 2½” x 17¼” (483mm x 64mm x 438mm)
Shipping Weight:
47 lbs (21.4kg)
Installation Examples
The illustrations on the following pages show the wide variety of audio and audio/video systems that can be assembled
using one or more Sonamp 875D SE amplifiers. Your local authorized Sonance dealer is an expert in audio/video system
planning and installation. Sonance strongly recommends that you work with your dealer to ensure that your system is
properly planned, assembled and installed.
Summary of Contents for Sonamp 875D SE
Page 1: ...INSTRUCTION MANUAL SONAMP 875D SE 8 CHANNEL AMPLIFIER...
Page 2: ......
Page 26: ...26 SONAMP 875D SE 8 CHANNEL AMPLIFIER System Notes...
Page 27: ......
