1.4
1.5
1.6
1.7
Motor Side
If you have a perimeter trim already installed measure 10mm down from the bottom
of this trim and position rail ‘A1’. Make sure rail ‘A1’ is
LEVEL
and mark your drill
positions with a pen through the pre-drilled holes already visible on the rail.
Take away the trim and drill your holes required through the plasterboard ensuring
you
DO NOT
drill into the timber behind it.
Using the screws provided, screw the trim on securely.
DO NOT
over tighten the
screws as this may damage the plasterboard.
Repeat the above steps 1.4, 1.5 and 1.6 for rail ‘A3’.
A1
10mm
FI
TTING
GUIDE
SONASHADES.COM
4
SonaS
ky Mot
orised Blind
