and letters.
4. Enter the application: „Login”
5. Make sure that your device and smartphone are as close as possible and connected to the WIFI router.
6. Press the „+” button to add the new appliance to the program.
7. Select the type of the appliance: „Small home appliances”
→
„Heaters”
8. Press and hold the heater’s or the remote control’s WIFI reset button (5), until „AP 00” appears on the appliance’s display.
9. Enter the password of the WIFI network you want to use on your appliance, then press the „Next” button.
10. Select in the application that the heater’s WIFI indicator blinks quickly. After this, pairing runs, the heater connects to the cloud-ba
-
sed application.
Using the application, you can control all functions of the device.
You can disconnect the heater anytime from the cloud-based application. For this, press and hold the heater’s or the remote control’s
WIFI reset button until the red indicator light starts flashing quickly, the heater beeps once, then the indicator light goes out.
In the event of overheating, the
overheating protection function
switches off the unit. Power off the unit by unplugging it from the
electric outlet. Allow the appliance to cool down (min. 30 minutes). Check whether the air inlet and outlet openings are obstructed or
not, and clean them if necessary. Reinstall the appliance. If overheating protection activates again, power off the appliance by unplugg
-
ing its power plug and contact a service facility.
CLEANING, MAINTENANCE
In order to ensure optimum functioning, the appliance may require cleaning at least once a month, depending on the manner of use
and degree of contamination.
1. Switch off and power off the appliance by unplugging it from the electric outlet before cleaning.
2. Allow the appliance to cool down (min. 30 minutes).
3. Clean the cold air inlet and the warm air outlet openings with a vacuum cleaner, a brush.
4. Use a slightly moistened cloth to clean the appliance’s outer surface. Do not use any aggressive cleaners. Avoid getting water inside
of and on the electric components of the appliance.
TROUBLESHOOTING
Malfunction
Possible solution
The appliance does not heat
Check the power supply.
Check the thermostat settings.
Overheating protection may activated.
Overheating protection activates frequently.
Clean the appliance.
THIS PRODUCT INCLUDES BUTTON CELL. DO NOT SWALLOW THE BATTERY, RISK OF CHEMICAL BURN! IN CASE OF
INGESTION, IT CAN CAUSE STRONG INTERNAL BURN WITHIN 2 HOURS AND MAY LEAD TO DEATH! KEEP THE NEW AND
USED BATTERIES OUT OF REACH OF CHILDREN! IF THE COVER OF BATTERY COMPARTMENT CANNOT CLOSE PROPERLY,
DO NOT USE THE PRODUCT MORE, AND KEEP OUT OF CHILDREN! IF YOU THINK A BATTERY HAS BEEN SWALLOWED OR
GOT INTO ONE OF THE BODY PARTS, IMMEDIATELY CONSULT A DOCTOR!
Simplified EU Declaration of Conformity
Somogyi Elektronic Ltd. certifies that the FK 350 WIFI radio equipment complies with the 2014/53 / EU directive. Full text of EU Certifi
-
cation of Conformity is available at the following web address: www.somogyi.hu
Waste equipment must be collected and disposed separately from household waste because it may contain components
hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or
at any distributor which sells equipment of identical nature and function. Dispose of the product at a facility specializing in the
collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you
have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufac
-
turer as prescribed in the relevant regulations and shall bear any associated costs arising.
SPECIFICATIONS
power supply:
230 V~ / 50 Hz
output
1000 W / 1300 W / 2300 W
maximum output:
2300 W
IP protection:
IP20: The appliance is not protected against ingress of water.
dimensions heater:
68 x 41,5 x 18 cm
transmission frequency
2,4 GHz / 1 mW
noise level:
56 dB(A)
weight:
4
kg
length of power cable:
1,4 m