EN
Before using the product for the first time, please
read the instruction manual below and retain it for
further reference. The original instructions were written in
the Hungarian language.
This weather resistant, LED floodlight with motion sensor is perfect
for illuminating buildings or yards. Solar powered design, it can be
installed independently from mains power.
PARTS OF THE LUMINAIRE
Figure 1.
1. floodlight with 60 pcs built-in high brightness SMD LEDs
2. PIR motion sensors
3. switches
4. battery holder lid
5. foldable console
6. screws, dowels, allen key
INSTALLATION, USE
1. Decide where you want to mount the motion sensor floodlight and the solar
panel. Ideally, the solar panel must be exposed to direct sunlight.
2. Solar panel can fixed on wall or placed on horizontal surface. You can set
the ideal tilt angle, when the sunlight falls perpendicularly to the solar panel.
3. Use the enclosed Allen key to loosen and tighten the screws on the side of
the appliance, you can adjust, then fix the tilt angle of the bracket this way.
4. The concrete anchor supplied with the product allows only fixing on
concrete surface. If you want to fix the product on a different surface, use the
appropriate screws and dowels.
5. You can adjust the tilt angle of the LED panel, after adjusting it, fasten the
screws on the side of the appliance.
6. Press the buttons on the back of the LED panel to switch the product on.
7. The PIR motion sensors detects a cone of 180°, up to 8 m distance.
8. button: to switch on or off the appliance.
9. button: the product switches on automatically at dusk and illuminates
continuously at 20% brightness.
10. button: after dark, the product starts lighting automatically at full
brightness for 20 seconds when it detects movement, then continues
lighting at 3% brightness.
11. button: after dark, the product starts lighting automatically at full
brightness for 30 seconds when it detects movement, then switches off.
CLEANING, MAINTENANCE
In order to ensure optimum functioning of the luminaire, the unit may require
cleaning at least once a month, depending on the manner of use and degree
of contamination. Clean the outer surface of the luminaire and the solar panel
with a slightly moistened cloth. Do not use aggressive cleaners! Avoid getting
water inside of and on the electric components of the appliance.
TROUBLESHOOTING
WARNINGS
• Make sure the appliance has not been damaged during transport!
• Use only with the included solar panel, not with other power supply!
• Do not use the luminaire with damaged shielding!
• LED light source is not replaceable in the luminaire. By the end of the lifespan
of the light source, the entire product has to be destroyed.
• The luminaire is not suitable for loop-in installation.
Do not stare into the light of the LED!
Waste equipment must be collected and disposed separately from
household waste because it may contain components hazardous
to the environment or health. Used or waste equipment may be
dropped off free of charge at the point of sale, or at any distributor
which sells equipment of identical nature and function. Dispose of
the product at a facility specializing in the collection of electronic
waste. By doing so, you will protect the environment as well as the
health of others and yourself. If you have any questions, contact
the local waste management organization. We shall undertake the
tasks pertinent to the manufacturer as prescribed in the relevant
regulations and shall bear any associated costs arising.
DISPOSING OF ALKALINE AND RECHARGEABLE
BATTERIES • Batteries, whether alkaline or rechargeable, must
not be handled together with regular household waste. It is the
legal obligation of the product's user to dispose of batteries at a
nearby collection center or at a retail shop. This ensures that the
batteries are ultimately neutralized in an environment-friendly way.
TECHNICAL DATA
operational temperature: . . . -10 - +40 °C
IP65 meaning: Protected against dust penetration. Protected against low
pressure water jets (from all directions).
accumulator: . . . . . . . . . . . .
7200 mAh (Li-ion 18650 / 3,7 V)
output:. . . . . . . . . . . . . . . . .
10 W (60 x 2835 SMD LED)
brightness: . . . . . . . . . . . . .
1000
lm
color-temperature: . . . . . . . .
6000
K
detection angle: . . . . . . . . . . 1
8
0° conical
detection distance:. . . . . . . . 8 m
size: . . . . . . . . . . . . . . . . . .
30 x 25 x 3,5 cm
solar panel LED floodlight
FLP 1000 SOLAR
Malfunction
The floodlight does not
illuminate in dark when
detecting
movement.
Possible solution
Check the switch of the device!
Clean the PIR sensor!
Check if the solar panel can get enough
light. Check the location and clean it
!
