somnotec
QUISI
®
Version 2.0 (Stand: 28.06.2001)
Seite 30 von 45
4.4. Transfer data to the PC
To transfer the data recorded during the night from the recorder to the PC:
Switch on the recorder.
The display shows: ‘Welcome to QUISI’.
The message
‘DATA!’
tells you, there is data in the
recorder.
Press
TRANSFER
to send the data to the PC.
When data transfer is finished, you get the message
‘DONE’
.
The recorder goes back to the off-line mode and can be
switched off or the data can be deleted.
If the feature transfer fails, the PC screen shows an error message. You should react
accordingly.
Attention!
If an error occurs, you can stop transfer by pressing
TRANSFER
again.
After successful transfer the data in QUISI should be deleted.
Welcome
DATA!
TRANS
FER
Off-Line
DONE
