ZWAVE to RTS INTERFACE
Specification, Installation & Operating Instructions
DESCRIPTION
The Somfy Z-Wave Universal RTS Interface (ZRTSI) is a Z-Wave bridge controller
that resides as a secondary controller node within a designated Z-Wave control
network. It receives Z-Wave transmissions and converts them to motor control
commands for Somfy”s full range of RTS wireless products.
The ZRTSI has 16 virtual ZWave nodes that correspond to 16 RTS channels. All
nodes can be automatically included with a Somfy TaHOma primary controller
(1811151) or other ZWave controllers. Individual nodes can be also manually
included in the network.
Z-WAVE TECHNICAL SPECIFICATIONS
A. Controller Bridge Node
- Main Controller Bridge Node is the repeating Node
- Bridge Node supports Network Wide Inclusion (NWI)
- Manufacturer ID: 00 47 (Somfy)
- Product Type: 5A 52
- Product ID: 54 00
- ZWave firmware: Controller Bridge Library 3.20
- ZWave Series Chip: 300 Series
Command Classes Supported By Bridge Node
- Controller_Replication
- Version
- Manufacturer_Specific
- Basic Device Class: Basic_Type_Static_Controller
- Generic Device Class: Generic_Type_Static_Controller
- Specific Device Class: Specific_Type_Not_Used
B. Virtual Nodes
- Manufacturer ID: 00 47
- Product Type: 51 52
- Product ID: 54 xx
XX will be 01 - 16, which represents the RTS channel. For example, if the product ID is 54 08, then it
correspons to RTS channel 8.
Command Classes Supported By Virtual Nodes
- Version
- Manufacturer_Specific
- Switch_Multilevel
- Switch_Binary
- Scene_Activation
- Scene_Actuator_Conf
- Basic Device Class: Basic_Type_Slave
- Generic Device Class: Generic_Type_Switch_Multilevel
- Specific Device Class: Specific_Type_Calss_A_Motor_Control
