![background image](http://html.mh-extra.com/html/somfy/slidymoove/slidymoove_replacing_1317494013.webp)
2
EN
- Replacing the SLIDYMOOVE electronic unit - SOMFY
EN
1.1 Installing the new electronic unit
REPLACING THE ELECTRONIC UNIT 1
EN
For your safety, these operations must be carried out with the power supply switched off.
1
2
3
1 - ON
23
0V
• Switch the
installation
off.
• Unscrew and remove the
motor cover.
• Identify the 230V power supply
cable and the peripherals cables.
Until they are reconnected, the accessories
wires must remain insulated (for example with
a screw terminal or insulating tape) to avoid
any risk of a short circuit.
4
5
• Install and screw the new electronic unit into
place.
• Clip the aerial on top of the motor.