16/18
Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images
QuickCopy & QuickCopy PC Software
Interactive operating instructions
Defining zones with IB+ versions
This setting can be done only with the QuickCopy PC Software.
With Chronis Smoove IB+ and Soliris Smoove IB+, it is possible to define up to 3 different zones. Each
zone for the timer function is settable individually. You can also decide for each zone whether to
activate the Sun, Wind, or Rain Function. For example: the living room and the bedroom should both
have different cycle times. For this, the IB+ device requires 2 zones.
Note:
• In the QuickCopy PC Software, the number of zones is defined and the corresponding parame-
ters are set. Following this procedure, the Smoove devices are not yet assigned to the corres-
ponding zones. There is a further procedure to assign zones. As soon as the Soliris Smoove
IB+ or Chronis Smoove IB+ is plugged into the wall adaptor again and the Smoove devices
are connected, this procedure can be carried out. Refer to the operating instructions of Soliris
Smoove IB+ and Chronis Smoove IB+.
• The different zones are not designed to control different types of end products (Venetian blinds,
roller shutters, awnings). If you want to do this, you must use different Chronis Smoove IB+ or
Soliris Smoove IB+ devices. You can also apply another product, e.g. Somfy animeo IB+ Touch-
Buco. With this option, you can even build 4 to 8 zones per central controlling.
Defining the number of zones
1. Open the settings window of a Smoove IB+ device.
2. Under "Zones", select the number of zones (example:
Soliris Smoove IB+ with 2 zones).
Setting a zone individually
Under "Prog. timer", you can set each zone individually.
Instead of 4 cycle times, you now have 8 (2-zone
operation) or 12 (3-zone operation).
Under "Sun, Wind, Rain", you can decide which zone
should carry out which function.
Example: Zone 1 and 2 are both assigned with the
Sun Function. The Wind and Rain Functions are only
assigned to zone 1.
