SOMFY Oximo 40 io Instructions Manual Download Page 20

9

EN

Copyright © 2016 Somfy SAS. All rights reserved.

Images not contractually binding

3. USE AND MAINTENANCE

This drive is maintenance-free

3.1. UP AND DOWN BUTTONS

Pressing  the 

Up

  or 

Down

  button  fully  raises  or  lowers  the 

motorised product.

3.2. STOP

 

FUNCTION

The motorised product is moving.

 

-

%ULHÀ\

 press 

my

: the motorised product stops automatically.

3.3. FAVOURITE POSITION (my)

Besides the upper and lower positions, an intermediate posi-
tion known as the “favourite position (my)” is programmed as 
standard in the Oximo.

To use the favourite position (my):

 

-

%ULHÀ\

  press 

my

:  the  motorised  product  starts  to  move, 

and stops in the favourite position (my).

To  modify  or  delete  the  favourite  (my)  position,  see  the 
section entitled “Additional settings”.

3.4. OPERATING WITH A SOMFY SENSOR

Refer to the corresponding guide.

3.5. ADDITIONAL SETTINGS

3.5.1. Modifying the favourite position (my)

1) 

Place  the  motorised  product  in  the  desired  favourite 

position (my).

2) 

Press 

my

IRU§VHFRQGVXQWLOWKH

motorised product moves 

up and down: the desired favourite position (my) has been 
programmed.

3.5.2. Deleting the favourite position (my)

1) Press 

my

: the motorised product starts to move, and stops 

in the favourite position (my).

2)  Press 

my

  again  until  the  motorised  product  moves:  the 

favourite position (my) is deleted.

3.5.3. Adding/Deleting Somfy control points and Somfy sensors

Refer to the corresponding guide.

1

2

3

1

2

1

2

Summary of Contents for Oximo 40 io






















Reviews: