6
EN
Copyright © 2016 Somfy SAS. All rights reserved
Images not contractually binding
Setting the end limits in semi-automatic mode (2.3.3.c)
Setting the upper automatic and lower manual end limits.
1) Lower the motorised product to the desired position by
pressing the
Down
button.
2) Press the
my
and
Up
buttons simultaneously until the
motorised product rises; the lower end limit is set.
3) Press the
my
button to stop the motorised product.
7RFRQ¿UPWKHHQGOLPLWVSUHVVWKH
my
button until the
motorised product moves up and down.
Setting the upper manual and lower automatic end limits.
1) Raise the motorised product to the desired position by
pressing the
Up
button.
2) Press the
my
and
Down
buttons simultaneously until the
motorised product is lowered; the upper end limit is set.
3) Press the
my
button to stop the motorised product.
7RFRQ¿UPWKHHQGOLPLWVSUHVVWKH
my
button until the
motorised product moves up and down.
2.3.4. Recording the control point
The motorisation is in programming mode:
- Quickly press the PROG button on the RTS control point to
be programmed:
ĺ7KH PRWRULVHG SURGXFW PRYHV XS DQG GRZQ WKLV 576
control point is programmed in the motorisation.
If the motorisation is no longer in programming mode, repeat Step 2.3.1 then perform
Step 2.3.4.
1
2
3
4
1
2
3
4
PROG.
