9
Oximo WT, Altus WT and Maestria WT
Adjusting end limits on the WT motors
(for motors from 2015)
A cable with a shunt (WT) switch is needed for setting a WT motor. This switch allows powering
both directions simultaneously and it is needed to start and stop the setting process.
1 Connect the motor using a setting cable
RTS
WT
RTS
WT
RTS
WT
OK
4
Not OK
3
Switch the brown and the black wires.
Earth
Earth
Neutral
Neutral
4 Put the rolling shutter or the screen in the upper end limit
2 Check the rotation direction
RTS
WT
230V AC
3 Adjust the rotation direction (cut the power to the motor first)
Adjusting the upper end limit of a Maestria WT motor (fixed end limit), an
Oximo WT motor (fixed end limit) or an Altus WT motor
Summary of Contents for Maestria WT
Page 1: ...Manual Maestria WT motor...
