5
Maestria WT
Setting 2: Setting of 1 fixed down end limit and an automatic upper end
limit.
After the setting, the bottom bar will compensate the fabric lengthening every 30 cycles. After 180
cycles, this frequency will change to every 90 cycles. A cable with a shunt (WT) switch is needed for
setting a WT motor. This switch allows powering both directions simultaneously and it is needed to
start and stop the setting process.
Setting the Maestria WT motor
1 Connect the motor using a setting cable
2 Check the rotation direction
3 Adjust the rotation direction (cut first the power to the motor)
4 Activate the setting mode
RTS
WT
RTS
WT
RTS
WT
OK
4
Not OK
3
Switch the brown and the black wires
Earth
Earth
Neutral
Neutral
Push the WT button
until...
...short up and down
movement
3 s
RTS
WT
230V AC
Motor
reacts after
+/- 1 s
Remark:
Keep the button(s) pushed until
the end of the second movement
Summary of Contents for Maestria WT
Page 1: ...Manual Maestria WT motor...
