SOMFY LT50 CMO, Installation Manual

Page: 12 / 36

Copyright © 2007-2016 Somfy SAS. All rights reserved.
LT 50 CSI - LT 60 CSI
12
EN
CONTENT
,QWURGXFWLRQ
6DIHW\
2.1. General safety advice 13
6SHFL¿FVDIHW\DGYLFH
2.3. Operating conditions 13
,QVWDOODWLRQ
3.1. Motor preparation 13
3.2. Tube preparation 13
3.3. Motor/tube assembly 14
3.4. Fitting the adjustment pull tabs (optional) 14
3.5. Fitting the emergency crank 14
3.6. Fitting the motorised tube 14
3.7. Wiring 14
&RPPLVVLRQLQJ
4.1. Checking the direction of rotation 15
4.2. Adjusting the end limits with the momentary action-type switch 15
$GMXVWLQJWKHHQGOLPLWVZLWKWKH¿[HGSRVLWLRQVZLWFK
4.4 Checking the settings 17
4.5 Fitting the protective housing 17
2SHUDWLRQ
5.1 Operating the control point 18
5.2. Operating the emergency crank 18
7HFKQLFDOVSHFL¿FDWLRQV
1. INTRODUCTION
The LT 50 CSI and LT 60 CSI motors are designed to drive roller shutters and awnings.
They are equipped with a back-up system used to open and close the roller shutters and awnings in the
event of a power cut: the roller shutter or awning can be manually opened and closed using a special
integrated crank.
The upper and lower end limits of the motor can be adjusted using push-buttons. The push-buttons are
covered by a protective housing which ensures the motor head is sealed when installed outdoors with the
push-buttons facing upwards.