JR RU 30 RTS LI-ION
EN
5
Copyright
©
2017 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
2.3. COMMISSIONING
!
The manufacturer doesn’t need to charge the battery before setting.
!
Orange LED blinks continously in setting mode.
!
Green LED blinks once when any order from paired remote is received.
2.3.1. Wake up the drive
For initial unpackaging of drive, wake up the drive by briefly
pressing the motor head programming button or plugging on
the charger.
The driven product briefly moves Up and Down 3 times and LED
lights orange.
2.3.2. Preprogramming the control point
Press the UP and DOWN buttons simultaneously on the control point:
the driven product moves Up and Down and the control point is temporarily programmed to driven
product.
2.3.3. Checking the rotation direction
Press the control point UP button:
a) If the driven product raises (a), the rotation direction is cor-
rect: proceed to section «Setting the end limits».
b) If the driven product is lowers (b), the rotation direction is
incorrect: move to the next step.
• b1) Press the control point MY button until the driven
product moves Up and Down: the rotation direction has
been modified and green LED blinks 5 times.
• b2) Press the control point UP button to confirm the ro-
tation direction.
2.3.4. Setting the end limits
!
The end limits can be set in any order.
1) Press and hold the UP button to move the driven product to
the desired Up position. If necessary, adjust the Up position
using the UP or DOWN buttons.
2)
To memorize the UP limit:
Press the MY and DOWN but-
tons simultaneously and release once the driven product
begins to move. The Up limit is now memorized and green
LED blinks 5 times.
3) Press the MY button when the driven product reaches the
desired Down position. If necessary, adjust the down posi-
tion using the UP or DOWN buttons.
4)
To memorize the Down limit:
Press the MY and UP but-
tons simultaneously and release when the driven product
begins to move. The Down limit is now memorized. The
driven product moves up and will stop at its upper limit and
green LED blinks 5 times.
5)
To confirm and complete limit programming:
Press and hold the MY button until the driven
product briefly moves Up and Down. The end limits are now recorded and green LED blinks 5
times.
3x
a
b
=
=
b2
b1
1
2
3
4
5
