SOMFY ilmo 50 S WT, Installation Manual

Page: 39 / 100

39
ilmo 50 S WT Installation guide
Copyright © 2008 - 2009 Somfy SAS. All rights reserved.
EN
4.5 Ÿv#ˆ ,‹šv, #$†‡#$) vq,ššv
ˆvv)q,ššv?ˆ "#$) v
1)
Fit the tube complete with S tubular module (D)
to the end bracket (J).
2)
Insert the connector (K) of the ilmo WT module
(E) into the S tubular module (D).Screw the
connector (K) into the S tubular module (D).
3)
Fit the tube complete with S tubular module (D)
to the motor bracket (L).
Fit the stop ring (M).
5. Wiring
1)
Turn off the power supply.
2)
Connect the motor according to the information
in the table below:
230 V 50 Hz Cable
a Blue Neutral (N)
b Brown Live, Direction 1
c Black Live, direction 2
d Yellow/green
Earth ( )
{_Š$##,,$,‹
1)
Switch the power back on.
-
Press the "Up" button at the control point:
À
If the roller shutter rises, the wiring is
7__87Y]X`7L66LXLX\L6‡XL6[8`*
À
If the roller shutter is lowered, go to the
next stage.
2)
Switch off the power.
-
Reverse the brown wire and the black wire
connected to the control point.
3)
Switch the power back on.
-
Press the "Up" button to check the direction of
rotation.
2
D
E
K
3
L D
M
J
1
D
2
1
OFF
a
b
c
d
l
N
a
b
c
d
1
ON
3
ON
2
OFF