Due
to
our
commitment
to
the
constant
development
and
improvement
of
our
products,
we
reserve
the
right
at
all
times
to
make
any
modifications
to
them
which
we
consider
to
be
of
value.
Photos
and
illustrations
non-contractual.
SOMFY
Activités SA, capital of 35,000,000 Euros,
Annecy Registry of Companies 303.970.230
-
100%
recycled
paper
You must store the numbers for sending alarm SMS/vocal alerts
To store the number of
user 1
for sending alarm SMSes to mobile or fixed phones (for fixed phones, the alarm SMS will be voice synthesised by
the operator):
1
0
1
1
OK
To store an SMS number.
0
0
X
X
7
6
0
.
9
6
4
8
1
2
OK
.
00XX760964812
➜
➜
The new phone number is stored (for example) (max. 17 digits)
XX = country code, e.g. 44 for England).
or
0
OK
.
Supprimé
➜
➜
The number is erased.
Follow the same procedure for the voice alert number, menu
1
0
1
2
+
OK
.
.
Inform the recipients of alert messages that their phone numbers have been stored.
Activating the SIM card to receive SMS or voice calls
To activate the SIM card, go to:
https://www.somfy.som2m.com
Testing the entire system
1.
Fully arm the alarm
and then leave the house
: 2 x
BEEPs!
Wait for 2 minutes...
BEEP!
2.
After the 2 minute exit delay
, open all the doors and windows that are fitted with opening detectors. Move in front of at least
one movement detector.
3.
The sirens are triggered.
Allow the sirens to ring for 1 minute
. The central unit sends an SMS or a vocal message.
4.
Disarm the alarm
by pressing the
OFF
key on the remote control.
Using the system
Fully arming the alarm
On a
keypad
, press
ON
.
Enter
user code
or place the badge on the
reception area.
< 1s
< 1s
or
+
On a
remote
control
, press
the
ON
key.
< 1s
2 x
long
BEEPs
sound on the central unit and
the indicator
flashes green 3 times to confirm correct transmission
.
3 x
short
BEEPs
indicate a fault.
Disarming the alarm
On a
keypad
, press
OFF
.
Enter
user code
or place the badge on the
reception area.
< 1s
< 1s
or
+
On a
remote
control
, press
the
OFF
key.
< 1s
1 x
long
BEEP
sounds on the central unit and
the indicator
flashes green once to confirm correct transmission
.
3 x
short
BEEPs
indicate a fault.
If an alarm has been triggered, this is indicated on the LCD keypad
(flashing indicator, screen).
14
15
16
< 1s
Technical data
Indoor siren
Must be installed inside the dwelling only, at an altitude < 2,000 m
GSM central unit/
phone dialer
Mains adapter: Manufacturer: ENG - Model: 6A-051WT05; Input: 100-240V , 50-60Hz, 0.3A; Output: 5V 1A
Frequency bands and maximum power used:
433.42 MHz - 433.92 MHz
< 10 mW
434.355 MHz
< 10 mW
880 MHz – 915 MHz
< 2000 mW
1710 MHz – 1785 MHz
< 1000 mW
868 MHz – 870 MHz
< 25 mW
: Tri-band two-way io homecontrol
®
Classification: Mains adapter: Hazardous voltage / Tension dangereuse; GSM module: SELV/TBTS; IP VIDEO module:
SELV/TBTS; Motherboard: SELV/TBTS; 4 x 1.5 V alkaline batteries.
Must be installed at an altitude < 2,000 m
IP40 - IK06; Operating temperature: + 5 to + 40 °C.
GSM module
Battery: Manufacturer: Q-LITE INDUSTRIAL LIMITED -Model: PL603450
Caution: there is a risk of explosion if the battery is replaced with the wrong type.
Do not throw in the fire. Do not open. Do not drill.
Do not expose to extreme low or high temperatures.
GSM antenna for indoor use only.
Icons used on the products:
AC
DC
The mains adapter supplied with the product is double-insulated and does not therefore need to be earthed.
The mains adapter supplied with the product must only be installed in a sheltered, dry location indoors.
Do not dispose of the end-of-life product with your household waste. Return the product to the retailer from which it was purchased, or use
the separate collection services provided by the local authority.
