SOMFY Glydea Ultra RTS Series, Instructions Manual

Page: 6 / 128

6
Copyright © 2017 SOMFY ACTIVITES SA, Société Anonyme . All rights reserved
.
EN
2.4.4. Erasing the memory of the motor (Fig O)
This reset deletes all control points, all the sensors and all the end limit settings, and resets the motor’s favourite
position (my).
To reset the motor, use a pin to press and hold the S button until the motorised product moves 3 times.
All the settings are erased.
3.1. OPEN AND CLOSE BUTTONS
(Fig P)
Pressing the Open or Close button fully opens or closes the motorised product.
3.2. STOP FUNCTION
(Fig Q)
The motorised product is moving.
Briefly press
my: the motorised product stops automatically.
3.3. FAVOURITE POSITION (
my
)
(Fig R)
The motorised product is stopped.
Briefly press my: the motorised product starts to move, and stops in the favourite position (my).
To modify or delete the favourite (my) position, see the section entitled “Additional settings”
3.4. ADDITIONAL SETTINGS
3.4.1. Recording the favourite position (my) (Fig S)
1) Press
Open or Close to move the motorised product to the desired favourite postion (my)”.
2) Press
my until the motorised product moves: the desired favourite position (my) has been programmed.
3.4.2. Deleting the favourite position (my) (Fig T)
1) Press
my: the motorised product starts to move, and stops in the favourite position (my).
2) Press
my again until the motorised product moves: the favourite position (my) is deleted.
3.4.3. Adding/Deleting Somfy control points (Fig U)
1) Find an RTS control point programmed in the motor.
Press & hold the RTS programmed control point (A) PROG button or the receiver prog button until the motorised product
moves, the motor is in programming mode.
2) Quickly press the RTS control point (B) PROG button to add or delete, the motorised product moves & the RTS control
point (B) is programmed or deleted from the motor.
3.4.4. Modifying the motor rotation direction (Fig V)
Move the motorised product away from the end limits.
1) Press the
Open and Close buttons of the RTS control point simultaneously until the motorised product moves.
2) Press the
my button until the motorised product moves to reverse the rotation direction.
3.5. TIPS AND RECOMMENDATIONS FOR USE
3.5.1. Questions about the Glydea Ultra ?
If the motorised product still does not work, contact a motorisation and home automation professional.
3.5.2. Replacing a lost or broken Somfy control point
To replace a lost or broken control point, contact a Somfy motorisation and home automation professional.
3. USE AND MAINTENANCE
This drive is maintenance-free
Observations Possible causes Solutions
The motorised product
does not operate.
The control point battery is weak.
Check whether the battery is weak and
replace it if necessary.
The motorisation is in thermal protection mode. Wait for the motor to cool down.
4. TECHNICAL DATA
Power supply 100V - 240V
Radio frequency 433.42 MHz
Operating temperature 0°C to + 60°C
Index protection rating IP 30
Safety level Class I