27
CONNECTED LOCK
Installation
C.
Start auto-acquisition
2. INSTALL
THE CONNECTED LOCK /
C.
Start auto-acquisition
• (1) Using the grey metal knob, close your door and lock
it until the knob can no longer turn.
• (2) Insert the T-10 screwdriver into the slot above
the letter “C”.
- Press the button on the bottom for 3 seconds until
the LED lights up orange.
-
The motor will start to rotate in both directions
to learn to lock and unlock your door.
• (3) The indicator light shows whether the operation
has been successful.
- It blinks 3 times green = lock programmed.
It blinks red = failure
Check that there is no blocking or friction point that could
hinder the operation of the central knob before repeating
the operation.
Before using your connected lock, you must initialise it so that it fits
your door.
2
3
1
OK
OK
inside
+3’’
FINALLY, ADD THE COVER OF THE
CONNECTED LOCK →
© 2017 Somfy SAS. All rights reserved - Images for illustration purposes only.
