animeo IB+
4 Zone/8 Zone TouchBuco BACnet
2020/04/30
Seite 6
Connecting the weather station: The sensor technology (Compact Sensor, Outside Sensor Box, M8 or M13)
is connected to the TouchBuco via 2 cables (A - B). Please ensure the correct polarity when connecting. The
maximum cable length is 500 m. Further wiring topologies are also possible, assuming they use RS485 sen-
sor hubs. Have a specialist perform the installation to prevent damage to the system and your weather
station.
1.7 Choose external sun sensors
You have selected the
Outside Sensor Box
as weather station. Now specify which outside sensors are con-
nected. If you have selected the wrong sensors, you will later receive an error message, since the system
then does not receive complete data from the weather station.
Sensor connections:
A maximum of 8 sun sensors can be connected to the station. Sensors that are not connected must be de-
activated to prevent malfunctions. Carefully consider the best location for the sensors.
Example: Start with sensor 1, which you may install e.g. on the north side. We then recommend installing
sensors 2, 3 up to 8, working clockwise, i.e. towards north-east, east, etc.
1.8 Choose external wind sensors
You have selected the
Outside Sensor Box
as weather station. Now specify which outside sensors are con-
nected. If you have selected the wrong sensors, you will later receive an error message, since the system
then does not receive complete data from the weather station.
Sensor connections:
•
1 or 2 wind sensors: Now specify for each sensor whether it is "heated" (ref. 9140180) or "Standard"
(= unheated, ref. 9001608). The characteristic curves are different. An incorrect selection will lead to
incorrect measured values. If you only require one wind sensor or none, you will need to deactivate any
sensors not being used ("Not connected").
•
Wind direction
1.9 Choose external other sensors
You have selected the Outside Sensor Box as weather station. Now specify which outside sensors are con-
nected. If you have selected the wrong sensors, you will later receive an error message, since the system
then does not receive complete data from the weather station.
Sensor connections:
•
Outside Temperature
•
Rain Sensor
Summary of Contents for animeo IB+ 4 Zone Touch Building Controller
Page 49: ......