Sensors
M10
M25
Measuring Range
Resolution
Accuracy
Wind speed
●
●
0...35 m/s
0.1 m/s
± 5 % (± 1 m/s) rms over 360°
Wind direction
●
1...360°
1°
± 5° with laminar flow and windspeed > 2 m/s
Brightness
●
(x4
)
●
(x8)
0...100 kLux
0.1 kLux
± 200 Lux with < 2 kLux; ± 10 % with
≧
2 kLux
Global radiation
●
(x1
)
●
(x1
) 0...1,200 W/m
2
1 W/m
2
± 15 W/m
2
with < 100 W/m
2
;
± 15 % with
≧
100 W/m
2
Vertical radiation
(0°, 45°, 90°, 135°, 180°, 225°, 270°, 315°)
●
(x8
) 0...1,200 W/m
2
1 W/m
2
± 15 W/m
2
with < 100 W/m
2
; ± 15 % with
≧
100 W/m
2
Twilight
●
0...1 kLux
1 Lux
± 20 Lux with < 100 Lux; ± 20 % with
≧
100 Lux
Temperature
●
●
- 30...+ 50° C
0.1° C
± 1° C with laminar flow and windspeed > 2 m/s
Humidity sensor
●
0...100 % rel. humidity
0.1 % rel. humidity
± 10 % rel. humidity at 20° C and wind speed > 2 m/s
Precipitation
●
●
1/0 (precipitation yes/no) Thermal output, sensor dry, bedewing protection: 0.1 W
Thermal output, sensor wet, drying phase: 1.1 W
Accessories
Mast Adaptor
for Weather Station
Ref. 1860321
Metallic Mast
Ref. 1860335
Wall Mount Bracket
3
Ref. 1860336
Bracket
4
for Weather Station
Ref. 1860320
Dimensions
H: 90 mm/Ø 25 - 50 mm
H: 1 m/Ø 50 mm
200 x 90 x 30 mm (w x d x h)
180 x 80 x 80 mm
1
2
CHARACTERISTICS
Weather Station M10/M25
Supply voltage
24 V DC + 10 %/- 30 %
Max. current
230 mA@24 V
Operating temperature
- 30° C...+ 70° C
Material of housing
Polycarbonate
Housing dimensions (h, Ø)
105 mm, 103 mm
Weight
162 g
Protection class
Degree of protection
IP44 in working position
Conformity
www.somfy.com/ce
A
MOUNTING
n
For exact determination of wind and brightness direction the Weather
Station must be mounted in north alignment (N).
The place where the sensor is installed might have an impact on the
measured values.
[1] Façade mounted versions
[2]
Roof mounted version
1
Mounting with Somfy accessories (
1
-
3
)
on a mast Ø 50 mm.
2
Mounting on already existing mast Ø 25 mm.
3
Mounting on already existing mast Ø 50 mm with Bracket for
Weather Station (
4
).
[3]
n
Weather Station must always be installed upright, not horizontal
or in an angle.
B
WIRING
n
Use rigid cable.
n
If a hole has been drilled in the mast during installation of the
unit to fit the cable through, the cable may be damaged by sharp
edges.
m
The cable for connection of the Weather Station must be suitable
for permanent outdoor use and compliant to the relevant standards.
7 minutes after switching on the device, the flashing LED indicates
normal operation.
C
TOPOLOGY
A. „xx“ represents the bus system handled by the gateway, e.g. io,
SDN, ...
■
Not compatible with PoE switch.
EN
We care about our environment. Do not dispose of the appliance with usual household waste. Give it to an approved collection point for recycling.
7/20
-
animeo
Connect
. Connect Weather Station . Ref. 5137979C
Connection to …
Cable
Twisted pair
Max. length
Power Supply
Min.: 2 x 0.3 mm
2
/22 AWG / Max.: 2 x 0.5 mm
2
/20 AWG
Required
150 m / 300 m
RS485 Bus
Min.: 2 x 0.3 mm
2
/22 AWG / Max.: 2 x 0.5 mm
2
/20 AWG
Required
150 m / 300 m
CABLE