9
Copyright © 2017 - 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved
Copyright © 2017 - 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved
EN
WF Li-ion SOLAR PANEL
1. PRIOR INFORMATION
1. 1. SPHERE OF APPLICATION
The WF Li-ion SOLAR PANEL is a group of components that work in unison as a long life autonomous energy
source for Somfy Li-ion Volt WireFree™ products. This Product is designed for indoor use only.
Note: This product is designed to meet the energy requirements of Somfy WireFree™ Motor applications.This
Solar Pack should be used for single motor shades only, two (2) or more motors should never be connected to
one (1) solar pack source
Contents of the Pack include:
(1) WF Li-ion SOLAR PANEL
(1) Glass-Mount Adhesive
(1) Alcohol wipe
(1) Instructions
(1) WF Li-ion SOLAR PANEL Mounting Brackets (2” & 4”)
1. 2. LIABILITY
Before installing and using the WireFree Motorized window covering, please read these instructions carefully. In
addition to the instructions provided in this guide, please also comply with the instructions set out in the enclosed
Safety instructions
document.
The WireFree Motorized window covering must be installed by a home motorisation and automation professional,
in accordance with Somfy’s instructions and the applicable regulations in the country of installation.
Any operation of the WireFree Motorized window covering outside the sphere of application described above is
prohibited. Such operation shall exclude Somfy from all liability and invalidate the Somfy warranty, as will any
failure to comply with the instructions given herein and in the enclosed
Safety instructions
document.
TRANSLATED INSTRUCTIONS
CONTENTS
3. Product in Use
12
3. 1. Normal Operation
12
3. 2. Excessive Energy Use
12
3. 3. Window Application Tables & Guidelines
12
3. 4. Tips and recommendations for use
13
These instructions apply to all WF Li-ion SOLAR PANEL, the different versions of which are available in the current
catalogue.
After installing the WireFree Motorized window covering, the installer must inform his customers of the operating
and maintenance conditions for the WireFree Motorized window covering and must pass the operating and
maintenance instructions on to them, as well as the enclosed
Safety instructions
document. Any After-Sales
Service operation on the drive requires intervention by a home motorisation and automation professional.
Should any doubt arise during installation of the drive or for additional information, consult a Somfy contact or
visit www.somfy.com.
⚠
Safety Warning !
1
Warning !
Β
Information
2. INSTALLATION
1
These instructions are
mandatory
for the home motorisation and automation professional installing
the drive.
1
Never drop drop or mishandle the WF Li-ion SOLAR PANE should never be exposed to water.
2. 1. DETERMINE LOCATION OF SOLAR PANEL
The WF Li-ion SOLAR PANEL must always be installed indoors, and should be positioned to received direct sunlight
for optimum performance..
⚠
Caution! Never install the WF Li-ion SOLAR PANEL on any
window glass allowing less than 65% light transmission
(including Low E glass and/or window tinting), or obstructed by a
window pane or bug screen. Always leave the photovoltaic cells
unobstructed, do not put anything in front of them.
Note: WF Li-ion SOLAR PANEl should be installed/positioned in relation
to the motor location (left or right side) Extension cables (purchased
separately) should be used for installations that require the Solar Panel to be mounted beyond the length of the
included cable connectors.
2. 2. MOUNTING THE WF Li-ion SOLAR PANEL.
⚠
Caution! It is imperative that window hardware or framing does not interfere with the WF Li-ion SOLAR
PANEL!
Determined the position of the WF Li-ion SOLAR PANEL (against
window, within reach of wire harness) prior to application of 2-sided
tape to insure proper adhesion the first time. Use brackets when direct-
to-glass mounting is not advisable Please refer to the corresponding
instructions.