![background image](http://html1.mh-extra.com/html/somfy/1875108/1875108_manual_1318273053.webp)
53
Copyright © 2018 Somfy Activités SA. All rights reserved.
Assigning a zone to the external wall movement detector (PROTEXIAL io only)
The operating mode of the external wall movement detector can be selected:
■
Either using the 2 switches located inside the detector
■
Or locally on your computer, from the “Device list” page in the
Installer menu.
The choice of zone on the computer overrides the positions of the switches on the device.
Using the switches inside the detector:
If you choose to set the operating mode using the switches,
you can define:
■
Either a setting for operation in
alarm mode
■
Or a setting for operation in
pre-alarm mode
Zone
Positions of the
switches
What happens in the event of intrusion
(in partly or fully armed mode)
Alar
m mode
AD
(default)
If zone A is armed:
■
Chime!
(if KIELA™
function on)
If zones A, B and C are armed:
■
Delayed triggering of the sirens, flash, dial-up and
roller shutter lowering
(1)
after the entry delay and
light control activation
■
Recording in the log (menu 6 “Event log”)
A
If zones A, B and C are armed:
■
Immediate triggering of the sirens, flash, dial-up, roller shutter lowering
(1)
and light control activation
Pr
e-alar
m mode
AX
1
If zone A is armed:
■
Chime!
(if KIELA™
function on)
If zones A, B and C are armed:
■
BEEP!
on the sirens
■
Triggering of the flash on the outdoor siren
AX
2
If zone A is armed:
■
Chime!
(if KIELA™
function on)
If zones A, B and C are armed:
■
BEEP!
on the sirens
■
Triggering of the flash on the outdoor siren
■
Light control activation (if a receiver is present)
■
Delayed lowering of the roller shutters
(2)
(1) Activate this function in the LCD keypad menu (see menu 7641 in the installation manual or “Scenario settings” on your
computer).
(2) Set this delay in the LCD keypad menu (see menu 775 in the installation manual or “Advanced settings” on your computer).
From a computer (PROTEXIAL io only):
AD
A
AX1
AX2
Switch