52
Copyright © 2018 Somfy Activités SA. All rights reserved.
Opening the product
1
Remove the fixing screw (
c
)
and take off the cover.
Do not
press on the lenses.
2
Remove the 2 fixing screws
(
b
) from the base.
Do not
touch the mirrors.
3
Remove the rear mount:
1
Separate it from the base
2
Slide it downwards
1
2
Installation
Inserting the batteries
Open the battery compartment.
Insert the
3 alkaline batteries
provided in the
battery compartment.
Make sure the batteries are inserted the
right way round (+/-). Make sure that
the ends of the batteries are touching
the battery contacts.
Storing the external wall movement detector in the central unit/phone dialer
Setting the central unit/phone dialer to storage mode:
If your system is already operational
, and the central unit/phone dialer is already installed, and
you want to add
a detector
. You can enter storage mode in 3 ways:
■
By going to the “Device list” screen in the
Installer menu
and pressing
Opening
, see the alarm system
installation manual.
■
Using the LCD keypad, and entering menu + installer code + 753 (open memory menu), see the alarm system
installation manual.
■
Using a previously stored remote control, and pressing “OFF” until the indicator goes out. You will hear a beep
on the central unit.
Storing the detector:
Reminder: maximum of 50 devices per central unit/phone dialer.
Press the button inside the external wall movement detector:
You will hear a
BEEP
on the central unit/phone dialer.
The external wall movement detector is stored in the central
unit/phone dialer.