C O M M A N D M A P P I N G L U T R O N D E V I C E S
Command mapping links Lutron button presses to trigger SDN group commands.
Click the Question Mark to access the Lutron
Button Reference Chart
13 of 16
1) In the Table tab, right-click in the LUTRON ID column
to open the Device window
2) Select the device to control this particular group
3) Enter the button number
4) Select the ACTION type from the dropdown:
•
PRESS
•
RELEASE
•
HOLD
•
MULTI-TAP
5) Click the download icon to record entry into the table
6) Select the SDN Group in the ADDRESS column
(See “SDN Integration Report” section of this guide)
7) Select the DEVICE type from the dropdown:
•
MOTOR: Individual Button Programming
•
LED: not used
•
KEY: Group Keypad Programming
8) Select the SDN COMMAND from the dropdown:
•
CLOSE - Sends the motor group to the closed or 100%
position
•
OPEN – Sends the motor group to the open or 0% Position
•
STOP – Stops the motor group when moving
•
RECALL –Sends a motor group to specified intermediate
position
(1-16 to be entered in the Value column in the Lutron table)
•
STORE –Records a specific motor group location and sets a
specified intermediate position
(1-16 to be entered in the Value column in the Lutron table)
•
GOTO – Sends a specific motor group to a specified
percentage
(0-100 to be entered in the Value column in the Lutron table)
•
SEQUENCE – Cycles Close, Stop, and Open commands with
a single button
9) Enter the VALUE of the % or Intermediate Position
•
If using the GoTo or Recall commands, the Value of the
% or Intermediate Position must be entered.