Somati system s.r.o.
, Jihlavská 510/2c, 664
41 Troubsko
IČ: 29260159, DIČ: CZ29260159
tel: +420 547 427 011, www.somati-system.cz
30
12.
INSTALLATION OF MOTOR
OGS STANDARD AND HIGH-LIFT
OGS LOW-LIFT
Picture 43
Picture 44
Install the motor bracket [1.1] to the wind-
ing roller bracket [1.3] using two screws
6HR M12x30 with large washer and nut. In-
sert spring into the shaft groove. Place mo-
tor on the shaft and fix to the bracket [1.1]
(by two screws M12x20 with fan washer
and nut).
Install the motor bracket [7.4] to the wind-
ing roller bracket [7.3] using two screws
6HR M12x30 with large washer and nut. In-
sert spring into the shaft groove Place mo-
tor on the shaft and fix to the bracket [7.4]
(by two screws M12x20 with fan washer
and nut).
