Somat DH-100, Operation Manual

Page: 20 / 23

20
PERIODIC MAINTENANCE AND INSPECTION
These procedures consist primarily of regularly scheduled cleaning and inspections. The time
intervals cited are based on normal use of the SOMAT
 unit; approximately one cycle per day , five
days per week. Equipment operating more than this or in severe service will require more frequent
inspection/maintenance.
Continued adherence to these inspections will provide adequate lead time when ordering spare
parts, thereby minimizing unnecessary and costly equipment downtime.
PREVENTIVE MAINTENANCE INSPECTION SCHEDULE
DH-100 DAILY WEEKLY MONTHLY QUARTERLY
1. GENERAL
a. Check shell and chamber for
wear.
X
b. Check exterior finish for
corrosion.
X
2. Drive
a. Check seals for leakage X
b. Check bearings for noise &
wear.
X
c. Check chain tension. X
d. Check auto-greaser capacity
**Optional Accessory**
X
e. Check all door seals X X