112302-901-08/04
OSM 4000
8 / 26
1.6
Safety Area
A safety area must be delimited around the Stabilization Mount in order to avoid any collision during the sta-
bilization motions. This perimeter must consider the Stabilization Mount’s maximal motions together with the
falling and/or projection risks associated with the payload placed on it. Safety markings, in compliance with
current standards, must forbid access to the safety area during movements. The implementation of this safety
protection is the responsibility of the customer.
Figure 1: Safety Area
1
•
The safety area is the minimum area which needs to be secured around the Stabilization
Mount. It is the user’s responsibility to do a risk analysis to define the right area size according
to the circumstances as shown in Figure 1 and in accordance with the used payload.
1
Distance between Mount pivot and top mounting plate; compare Figure 5
pay
lo
ad
heig
ht
+
54
mm
1
+
safety m
argin
(e.g
. 1
00
m
m
)
