112302-901-08/04
OSM 4000
7 / 26
1.4
Environmental- and Application Conditions
It is necessary to follow the mechanical and electrical mounting advices described in chapter 4.1 and 4.2. The
components need to be installed by staff properly trained and qualified to install the equipment.
In addition, only staff members that are trained to handle the equipment should be allowed to use the OSM
4000. Improper handling of the device will void the warranty and shorten the lifetime.
1.5
Risk Analysis
1.5.1
Risks during installation and maintenance
Risks detected
Preventive measures
Fingers getting caught in be-
tween moving parts
Do NOT touch the device by the areas marked by the red crosses as
shown in Figure 2.
Impact by sudden Mount /
payload movement
Maintenance work or installation of the Stabilization Mount / payload
ONLY with the device powered off and the power cable disconnected.
First start-up of the device WITHOUT the payload installed.
1.5.2
Risks during use
Risks detected
Preventive measures
Impact by Mount / payload
movement
With the device powered on, permanently monitor the safety area around
the device or ensure that no person can enter the safety area, as de-
scribed in chapter 1.6
Falling or ejected objects
Regularly check the tightening of the Stabilization Mount and payload fas-
teners.
